Alif Engineers

ER-007604 Erowa compatible ITS chuck D100mm with quil type B

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-007521 Erowa compatible ITS chuck D100mm


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-015105 and ER-036345 Erowa compatible quick chuck 100mm 


we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-010793 Erowa Compatible Uniholder Brass Chuck
Material :brass 
Make :Kimz co ltd south korea
our key sale products as below 
1) zero point precision work holding system for cnc wire edm2) Zero set |tool holding system (erowa and system 3R) Above two items are made in kimz co South Korea3) K200 and KC12 Rust remover from Nippon mecha chemical Japan4) edm drill tubes and edm filter and thread electrode copper5) zero point quick change system and vice for five axis milling machining

ER-017982 Erowa compatible quick chuck 50 harizontal extension


we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-010723  Erowa compatible checking pin 50\
Make :Kimz corporation south korea
our key sale products as below 
1) zero point precision work holding system for cnc wire edm2) Zero set |tool holding system (erowa and system 3R) Above two items are made in kimz co South Korea3) K200 and KC12 Rust remover from Nippon mecha chemical Japan4) edm drill tubes and edm filter and thread electrode copper5) zero point quick change system and vice for five axis milling machining

ER-008617 Erowa compatible gauging pin 50


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-007620 Erowa compatible ITS chuck d100mm with subplate d130mm

Size:80*80*157.5mm
Material :Premium Stainless steel HRC 57-60
Operation :6bar with air cleaning function 
Clamping power 6000N
Make :Kimz corp south korea
Alif engineers
Our key sales product are1) zero point precision work holding system for cnc wire edm2) Zero set |tool holding system (erowa and system 3R) Above two items are made in kimz co South Korea3) K200 and KC12 Rust remover from Nippon mecha chemical Japan4) edm drill tubes and edm filter and thread electrode copper5) zero point quick change system and vice for five axis milling machining

ER-129070 Erowa compatible Prisround stainless steel 


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

• Description :erowa power chuck 150 with base Plate 158*198mm

1. Size :198*158*67.5mm
2. Material :Premium Stainless steel ,HRC 57-60
3. Operation :6bar with air cleaning function 
4. Clamping power :10000N
5. Weight :7.89kg
6. Make :kimz co south korea 

ER-038824 Erowa manul chuck with base plate 145*100*59mm 
we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-008566 Erowa compatible collet chuck holder ER32

we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-150800 erowa compatible ITS chuck D100mmwith base plate d130mm

Our key sales product are1) zero point precision work holding system for cnc wire edm2) Zero set |tool holding system (erowa and system 3R) Above two items are made in kimz co South Korea3) K200 and KC12 Rust remover from Nippon mecha chemical Japan4) edm drill tubes and edm filter and thread electrode copper5) zero point quick change system and vice for five axis milling machining

Erowa compatible centering plate 


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-009214 Erowa centering plate 
Make :Kimz co ltd south korea
our keysale products as below 
1) zero point precision work holding system for cnc wire edm
2) Zero set |tool holding system (erowa and system 3R) Above two items are made in kimz co South Korea
3) K200 and KC12 Rust remover from Nippon mecha chemical Japan
4) edm drill tubes and edm filter and thread electrode copper
5) zero point quick change system and vice for five axis milling machining

ER-154100 Erowa compatible ITS chuck with Base plate D100*145mm

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-017984 Erowa compatible quick chuck 50,90

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

Erowa compatible quick chuck 50 with sub bar


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

Erowa compatible telescopic bracket
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-115699 Erowa compatible aligment pallet d115mm
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-106423 Erowa compatible sensor with Ball d3mm ,Fixed type
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-041600 MTS Integral chuck 
Size :400*360*55MM
Material :Premium Stainless Steel
Hardness :57-60HRC
Clamping Power :36000N
Application :For CNC Milling ,CMM machining 
Weight :45KG
Make :Kimz co south korea 
we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-007523 Erowa compatible ITS chuck d100mm with quil type A


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-007620 Erowa compatible ITS chuck d100mm with subplate d130mm

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-106341 Erowa compatible sensor with ball D5mm Spring type
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-137239 Erowa Compatible UPC pallet flat

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

• Size :D105*110mm
• Material :for manual adjustment for electrode on EDM spark erosion machine 
• Weight :5.4kg
• Make :kimz corporation south korea 

Alif EDM solutions deal in accesories/consumables/tool holding system for EDM machine ,CNC wire EDM machine and EDM drill machine 
distributor of sunrise edm tech taiwan for edm drill/cnc wire edm accesories and kimz corporation south korea for zero point tool holding system for cnc wire edm machine and zero set electrode holder (erowa and system 3R ) compatible

ER-008617 Erowa compatible gauging block 100
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-038658 Erowa compatible centering plate 
we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-007623 Erowa compatible ITS chuck D100mm with base 80*130mm


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-035212 Erowa compatible uniplate d72 steelA chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

Erowa compatible quick chuck 100mm with base plate d100*145mm


A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-017982 Erowa compatible quick chuck 50 vertical extension

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-143753 Erowa compatible integral MTS chuck M-P 4fold 200P



A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

Item name :ER Micro Image 50X

1. Version :Camera and monitor with ER ITS50 Amplification factor L50X
2. Application :Determination of dimensions of complicated contours
3. Screen :7inches 1080P
4. Visual accuracy :+/- 0.003mm
5. Power Voltage :400MA DC12A
6. Compatible of: Er-032464

Make :Kimz co south korea 

Erowa ITS chuck D100 
we alif engineers , distributor of kimz co south korea and sunyell international japan 
our key sale products as below 

1. Zero point |Precision work holding system for cnc wire edm

• A series |For small work piece upto 3KG
• B sereis |For small to medium work piece upto 5kg
• C series |For medium work piece below 10kg
• Beam sereis |For heavy work piece over 10kg

1. Zero Set |Tooling system for CNC Spark edm (Erowa and System 3R)
2. K200 & KC12 Rust Remover & EDM Filter 
3. EDM drill tubes and thread copper electrodes 
4. Vice and Zero point quick change system for cnc millng machine 

ER-038826 Erowa compatible ITS chuck D100mm 3in 1.A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-012299 Erowa compatible ITS chuck D100mm4 in 1.A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.

ER-069153 Erowa compatible ITS chuck D100mm 6 in 1
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.